Xmanager Forum

XDMCP connection problem in redhat linux

Last post: Wednesday, August 18, 2004 5:51 PM by Support, 7 reply

 
Saturday, August 7, 2004 4:53 PM - afantee

XDMCP connection problem in redhat linux

 
I set the linux envirement's file as the guide, but I still can not connect to the linux server. My envirements are vmware+redhat9.0+Xmanage2.0. Help me!
Monday, August 9, 2004 3:26 PM - Support

Re: XDMCP connection problem in redhat linux

 
The connection problem occurs due to the firewall settings on your Linux.
Please refer to FAQ #2, #5, and #12 at:

/products/xmg_faq.html

If the problem persists, provide us with the following:

- C:\Documents and Settings\%USER%\Application Data\NetSarang\Xmanager\2\Log\*.log
- The IP addresses of both Windows and RedHat 9.0

----
Technical Support
Monday, August 9, 2004 9:38 PM - afantee

Re: Re: XDMCP connection problem in redhat linux

 
But my win2kpro can connect to the physical RedHat9.0 by Xmanage, not the one on vmware.
Whether I should run some services except the XDMCP, for example Telnet service?
Tuesday, August 10, 2004 9:25 AM - Zookeyan

Re: Re: Re: XDMCP connection problem in redhat linux

 
Hi,

There are several type of networking on VMware. Usually bridged networking or NAT networking are used.
If the redhat90 system is using NAT on VMware it is difficult to connect into the system with Xmanager.
Briged networking is a easy way to use Xmanager and to use any other network programs.
You can edit the networking type of the virtual os.

I hope this can help you.
Thursday, August 12, 2004 1:25 PM - afantee

Re: Re: Re: Re: XDMCP connection problem in redhat linux

 
Thanks, but I just use the "Bridged" mode.
Thursday, August 12, 2004 5:39 PM - Support

Re: Re: Re: Re: Re: XDMCP connection problem in redhat linux

 
For further support, could you please upload Xmanager log file? You can find it at:

C:\Documents and Settings\%USER%\Application Data\NetSarang\Xmanager\2\Log\*.log

----
Technical Support
Saturday, August 14, 2004 6:08 PM - afantee

Xmanager log file

 
Here Xmanager log file is. Check it pls. Thanks a lot.
Attachment X0.log (2.7 KB)  
Wednesday, August 18, 2004 5:51 PM - Support

Re: Xmanager log file

 
According to the log messages, Xmanager cannot get a reply from the remote "gdm" process.

Please check if there is a display manager (gdm or kdm) is running on the redhat server.

The problem might also occur due to a firewall setting in the redhat server. The redhat server should allow UDP 177 connections. You may try to stop the firewall as following:

# service iptables stop

Hope this helps you.

----
Technical Support